Share on facebook
Share on twitter
Share on linkedin

How to Choose a Quality Handmade Stainless Steel Sink?

Hand made kitchen sink

Table of Contents

When looking for quality sink options, you need to add a stainless steel sink made by hand to your list of options. This kind of sink will hold up to daily challenges with ease and will tackle big messes without becoming damaged or etched. This is one of the best ways to ensure that you get a well-crafted sink that will work perfectly for your needs.

There are other options on the market, but this is one of the best ways to get the proper sink sizing if you need it. Handmade sinks are created by welding to form the sink by hand. Manual welding is done at the corners for straight lines as well as an industrial appearance. They can be made to unique sizing specifications and requirements. When you invest in a handmade sink that is correctly designed, it will be much more likely to drain properly and look finished and correct. This is a valuable set of benefits for your needs for many reasons.

If you are ready to learn some more about how to choose a quality handmade stainless steel sink, you need to read on.

How to Check the Quality?

Checking the quality of your stainless steel sink that has been made by hand is essential to making sure that you are getting the right product for your needs.

Verify the Measurements of Your Handmade Stainless Steel Sink

hand made stainless steel sink

You will need to ensure that the measurements you are looking for in a sink purchase are correct and accurate. This needs to be done with each sink that you are considering buying. You will want to be sure that the bowl size matches the standard size of sinks that you can buy elsewhere. This can ensure that your sink will drop right into prefabricated slots.

You can choose different sink measurements as needed, but each sink will need to have these measurements when it is made.

The Thickness of the Material

The thickness of the stainless steel used for your sink matters for its performance. The sink gauge represents the thickness of a stainless steel sink, you will want to be sure that the stainless steel used is at least G16 or G18. The lower the number, the thicker the thickness. However, you will need to ensure that the company verifies what materials they used.

Sink gauge

Because the welding positions of a hand-made sink are formed by hand, if a thin stainless steel material is used, the welding position is easy to dent from slight collision, this indicates the quality is not good.

It can fail when you get a sink that does not have the suitable sink gauge stainless steel. This is one of the most critical steps in verifying the durability and quality of a handmade kitchen sink.

Check the Welding Position

When looking at sinks with square corners, the welding is often more apparent than in a press sink, which is made by a machine in the form of one-time stamping. This means that every angle and every connection in the sink will show you whether or not the quality of construction you need is present. Make sure that the corners are smooth and solid as well.

welding position

Welding can differentiate between a sink that fails and a sink that holds up to daily use without leaks. You will also want to ensure that the welding is done correctly due to cosmetic reasons. There is nothing less attractive than sloppy and lumpy welds on a sink.

Drainage Hole

The drain hole is a critical part of the function of the sink. You will need the drainage hole to be correctly placed and correctly drilled out so that the sink will actually drain. The location of the drain hold needs to correspond to the size of the sink, and you also need to be sure that the sink has the right angle in the bowl to allow for drainage.

The drainage hole also needs to be placed right in the middle of the sink, or it will not work right. You can measure from the drain hole to the edges of the sink to make sure that the drainage hole is placed in the very middle of the sink.

drainer dimension

Some special designs may set the drainage hole on the side, so the design of the bottom of the sink should also be adjusted accordingly to allow the water to drain smoothly.

The surface finish of the sink

The finish of the sink can tell you a lot about the sink’s quality. It will also tell you if the sink will fit into the location where it needs to be placed. The most popular choices in North American markets are satin or brushed. These are the most reliable choices for projects that need practical sinks that will match most countertop colors and perform as expected.

Surface Treatment

In addition to its gorgeous appearance, the brushed or satin finish has an added benefit. It is more resistant to those pesky fingerprints than polished stainless steel and therefore requires less cleaning.

Check the Bottom of the Sink

You will also want to look at the bottom of the sink to see if there is insulation or a noise reduction pad. The coating should be sprayed correctly on the back of the sink, and there should be no cracks or flaws.

Spray painting

A good quality sink needs a noise reduction pad at the bottom, which can reduce the noise generated when the sink is usually used. The best material for the noise reduction pad is EVA material, If you use an inferior rubber pad, it will deteriorate over time and cause unpleasant odors from the sink bottom.

The bottom of the sink is coated with an insulating layer to prevent water droplets from condensing at the bottom, which plays a role in preventing moisture.

Verifying Sink Quality is Important

When looking at the quality of a sink, you need to consider all of these features before you determine if you are getting the sink you have been looking for. It can be easy to miss out on symptoms of poor handmade sink construction unless you carefully look at all the sink details. This is a critical step in the sink purchase process, and you should not skip this step.

Share on facebook
Share on twitter
Share on linkedin

Leave a Comment

Your email address will not be published. Required fields are marked *

17 + 6 =

Ask For A Quick Quote

We will contact you within 1 working day, please pay attention to the email with the suffix “”

Get Your Free Guide Today

The Ultimate Kitchen Sink Buying Guide

This article will tell you various locations that produce stainless steel sinks in China are associated with different levels of quality they made. Avoid being cheated by manufacturers by using this guide.